 |
|
|
|
Principle of operation :
RF Admittance Absorption Measurement principle using Sensing Probe using Driven shield- Coat guard circuit & corresponding 3 – Element Probe.
Features :
Three Element Coat Guard Technology : Ignores material build-up on the probe.
Suitable for High Dusty Environment, Field Selectable operation logic, Provides economical solutions.
Applications:
Building Materials: Cement, Sand, Clay, Lime etc., Foodstuff Industry : Milk powder, Flour, Salt, Foodgrains etc.,Plastic Powder Granules etc.,Timber Industry, Mining etc. |
|
|
|
|
|
Principle of operation :
Piezo-electric resonance principle using electronically stimulated fork vibrates & dampens when material is covered.
Features :
Fast & Easy Installation, No calibration, No effect of electrical properties of the service material, Suitable for High Dusty Environment, Field Selectable operation logic, Provides economical solutions.
Applications :
Building Materials: Cement, Sand, Clay, Lime etc., Foodstuff Industry : Milk powder, Flour, Salt, Foodgrains etc.,Plastic Powder Granules etc.,Timber Industry, Mining etc. |
|
|
|
|
|
Principle of operation :
Conductivity principle, when a conductive material touches a probe it give a signal.
Features :
Low AC on probes for prevention of electrolytic deterioration of electrodes. Variety of probes available for various process conditions. Multiple probes switching possible.
Applications :
For electrically conductive liquids in Food, Power Steel, Textiles, WTP, ETP etc. |
|
|
|
|
|
|
Principle of operation :
Rotation Damping principle using low revolution rotating paddle energies a relay when covered by material.
Features :
Motor Torque is adjustable, Special Clutch Mechanism to protect motor, Sealed bearing for rotating shaft, Adjustable shaft length, Various paddle design available.
Applications :
Cement, Food, Power, Steel, Ceramic, Plastic, Material Handling Industries etc |
|
|
|
|
|
|
Principle of operation :
Permanent Magnet Reed Switch Basis.
Features :
Potential free contacts, Various MOC, Side / Top Mounted version available, Single or Multilevel switching, Various switch ratings, Miniature version available.
Applications:
All Process Industries using Conductive & Non-conductive clear liquids such as Oil, Hot water, WFI, DM Water, Diesel etc
Pharma, Textiles, Chemical, Dairy, Petrochemicals etc. |
| |
|
|
|
|
Principle of operation :
Detection of change in capacitance principle.
Features :
Easy to install, Wide Temperature range, suitable for conductive liquids, no moving parts, compatible with food grade & corrosive liquids, Works well in Steam condensate, Wetted parts is PTFE, Different probe lengths, Logic / contact output available.
Applications :
Boiler Manufacturer, Pharma, Textiles, Chemical, Dairy, Petrochemicals etc. |
| |
|
| |
|
Principle of operation :
Based on sliding the ball by gravity principle.
Features :
Easy to install, Differential Level Control by adjusting the distance between the float & Counter weight, Potential free contact available. Compatible for corrosive, acidic, alkaline media.
Applications:
Effluent Treatment Plant, Water Treatement plant, Pump Manufacturer, Pharma, Textiles, Chemical, Dairy, Petrochemicals etc. |
| |
|
| |
|
|
|
Principle of Operation :
The radar antenna illuminates the target with a microwave signal, which is then reflected and picked up by a receiving device. The electrical signal picked up by the receiving antenna is called echo or return. The radar signal is generated by a powerful transmitter and received by a highly sensitive receiver.
Features :
Simple push button calibration (Accurate), 4-20mA output, RS-232/485 Communication calibration diagnostics & data logging software, PLC Compatible (Modbus RTU), Three or Four wire operation.
Applications :
Pharma, Textiles, Steel, Power, Dairy, Chemical Industries etc.
Food & Beverages, Chemical with Vapours , Water & Waste Water etc. |
| |
|
|
|
Principle of Operation :
An acoustic pulse is transmitted from the ultrasonic sensor face. The pulse travels to the surface being monitored and is reflected off this surface back to the sensor face. The time of flight is converted to an output signal directly proportional to the material level.
Features :
Simple push button calibration (Accurate), 4-20mA output, RS-232/485 Communication calibration diagnostics & data logging software, PLC Compatible (Modbus RTU), Two, Three or Four wire operation.
Sectors :
Pharma, Textiles, Steel, Power, Dairy, Chemical Industries etc.
Food & Beverages, Chemical, Oils etc. |
| |
|
|
|
Principle of Operation :
A capacitor is formed when a level sensing electrode is installed in a vessel. The metal rod of electrode acts a one plate of the capacitor and the tank wall acts as the other plate.
Features :
Two wire Transmitter, Compact, Low cost version.
Applications :
Pharma, Textiles, Steel, Power, Dairy, Chemical Industries etc.
Food & Beverages, Chemical, Oils, Silos etc. |
| |
|
|
|
Principle of Operation :
Change in resistance principle uses a sensor carrying reed switches, resistance chain & magnetic float. Magnetic float tracks fluid, magnetically activates an array of cascaded reed switches. The reed switches acts as the wiper of potentiometer made up by chain of resistors & this change in resistance is the level measured.
Features :
Two wire Transmitter, Stainless Steel MOC, Best for Oils, Gas Flameproof Gr.IIA &B to IS2148 Enclosure available, Compact
Applications :
Pharma, Textiles, Steel, Power, Dairy, Chemical Industries etc.
Food & Beverages, Chemical, Oils, etc. |
| |
|
|
 |
