innovative-solutions

Insertion Ultrasonic Flowmeter Solution for Large Pipe sizes

The 6, 8, 10, and 12-inch saddles are designed exclusively for the QS200 Insertion Ultrasonic Flowmeter. Supporting commercial and agricultural irrigation applications on large size pipes, by providing accurate information. Designed for above and below grade applications, like irrigation, municipal and underground monitoring where the flow rates are between 0.1 to 15 fps (0.03 to 4.6 m/s) and temperatures are below 140° F (60° C). QS200 inserts are supplied with two single conductors, 18 AWG solid copper wire leads that are 36 inches (914.4 mm) in length with UL Style 116666 direct burial insulation. It is not only low-cost and maintenance but also effective and easy to install. Hence making it perfect for your instrumental needs.

innovative-solutions

Industrial Drain and Effluent Analyzer

Industrial Discharge Analyzer designed to monitor the outflows from industrial facilities, and to detect fuels and other VOCs in sewage systems, drains and other waste water networks.
The instrument works by sensing gases or volatiles to provide a measurement system with very low maintenance requirements.
Taking a measurement every 2 seconds, the MS1900 is accurate in concentrations up to 5 ppm in water and its very wide dynamic range allows it to be used in a wide variety of environments.

innovative-solutions

Compressor Efficiency monitoring and leak detection solution

For every industry using Compressed Air as Utility will have an opportunity of immense savings by A versatile Calorimetric Flowmeter which record of compressed air consumption by department or individual equipment, Determine of losses from leakage, Peak load management, Control of compressor’s efficiency factor etc.

innovative-solutions

Source / River Intake water quality protection

On-line Fuel-In-Water/ Total VOC Monitor for measuring various volatile organic compounds in Air, Source water, river intake, land remediation, reclaimed water & protecting water contaminants for healthier & safer life. Breakthrough "e- Nose Technology" high sensitive electronic nose smelling contaminants & protecting mother earth..

innovative-solutions

An excellent check on compressed air quality

For all industries using Compressed Air as a utility for their production facility requires a regular compressed air dewpoint monitoring for preventing moisture damaging mechanical fittings & accessories related to the production. Industries specifically Pharmaceuticals, R & D, Semiconductor, Bio-Pharmaceuticals, Painting, Pipe Coating plants requires Compressed Air Dew point for their production quality controls.