Process Instruments are used to control or monitor process variables such as Flow, Level, Humidity, Moisture, Temperature, Conductivity etc.

Why are process instruments necessary?
These process instruments measure variable parameters which are needed to be monitored continually in the process of manufacturing so as to maintain the quality of end product output. If the end product output is maintained your customers will remain satisfied.

Thus using the best of our wide range of process instruments during the manufacturing of products at your plant will keep your customers happy! We deal in instruments for many process variables such as: flow, level, humidity, moisture, pressure, temperature, air velocity, dew point and conductivity. With our huge product basket we assure you we have a solution for all your process field instrumentation problems, needs or requirements.

A flow meter is a device used to measure the flow rate or quantity of a gas or liquid moving through a closed pipe/duct.

Why do you need to measure flow?
The accurate measurement of a fluid is necessary to obtain specific proportions as per the production process requirement.

The maintenance of definite rates of flow is important for maximum efficiency and precise production quality control.

If, the costs based on flow measurement will be incorrect and the measurement have errors daily; a very small percentage error daily can amount to large sums of wastage of money & time.

We are distributors for mostly all types of flow meters: electro-magnetic, paddle wheel insertion, ultrasonic, vortex, positive displacement (oval gear), Coriolis and thermal mass (calorimetric) flow meters and controllers for liquids & gases.

We would be glad to use our years of flow measurement expertise and suggest you the optimum flow metering solutions based your application demand & budgets.

Read MoreQuik Enquiry

category-image

The RF Admittance Type level switch operates on the basis of RF absorption measurement. The electronic unit generates a sinusoidal wave, applied to the electrode creating a field around i t . RF environment absorption changes (electrical loss) around the electrode are reflected on changes of generator supply current. such changes, caused by the increase in level is amplified and used to energies the relay.

Read MoreQuik Enquiry

category-image

MTS Offers Non- contact Ultrasonic Level Transmitter for Water, Effluent water, Oils, Non-foaming & Non-fuming liquids & for solid powders such as sand, non-dusty powders etc.

Read MoreQuik Enquiry

category-image

The electronically stimulated fork vibrates at its mechanically resonance frequency of 125 Hz when the fork is free of the service material. The resonance is caused by the piezoelectric crystals. One of the piezo crystals produces a small voltage which is transmitted to the switching amplifier. If the Fork is covered by the bulk material, a damping effect is produced and the piezo crystal does not produce the voltage and the amplifier will switch and a corresponding signal output is actuated. The vibration of the fork has self-cleaning properties.

Read MoreQuik Enquiry

category-image

MTS Offers Non-contact Radar Level Transmitter for various applications such as cement silos, foaming liquids, slurries etc

Read MoreQuik Enquiry

category-image

Humidity is defined as a quantity representing the amount of water vapour in the atmosphere or in a gas term as Relative/Absolute Humidity. It is sometimes very critical to measure the humidity (RH %) as it can create problems drying process in industries as well as stability chambers in laboratories. We provide online humidity transmitter as well as portable humidity instrument for the measurement of the Relative/Absolute humidity in %.

Read MoreQuik Enquiry

category-image

Rotary Paddle Switches are the most suitable for level detection of dust granules and other free flowing solids up to the particle size of Ø10 mm. Mounted in bins, silos and hoppers it can be applied for control of level, filling and emptying as well as for protection against overfilling.

Read MoreQuik Enquiry

category-image

MTS Offers Contact Type Capcitance Level Transmitter for normal applications such as water, solvents,chemicals, hot water etc. It is a compact, low cost, Loop Power level transmitter having 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tanks or storage vessels. These are having measuring range from 0.2 to 3 m for rod probe version.

Read MoreQuik Enquiry

category-image

Moisture refers to the presence of water in trace amounts in bulk materials. It can also be defined as the amount of water vapour present in the solids. It is very necessary to measure moisture as it can be very damaging to the quality of precast, ceramic clay, building materials, various food grains, powders used in manufacturing process or stored in warehouses.

Read MoreQuik Enquiry

category-image

MTS offers Aqua fork Point Level Switch ( Liquids )

Read MoreQuik Enquiry

category-image

MTS Offers Magnetic Float Operated Level Transmitter for Fuel oils, Diesel, LDO, Furnace Oil, Solvents & corrosive chemicals etc.

Read MoreQuik Enquiry

category-image

In order to maintain a continuous pressure in your manufacturing process we have a range of pressure meters and controllers, pressure sensors & transmitters and pocket sized economical range to measure pressure.

Read MoreQuik Enquiry

category-image

Side Mounted Magnetic Float Type level switches work on the principle of magnetic repulsion and therefore they are glandless and leak proof instruments. A permanent magnet fitted in the tail piece of the float repels another magnet inside the switch housing which in turn operates an SPDT micro switch. Micro switch contacts can be utilized for initiating audio-visual signals or pump control.

Read MoreQuik Enquiry

category-image

Temperature is a measure of hot & cold. During the manufacturing process the temperature measurement – infrared or portable or contact helps to analyse the expected temperature of the fluid, substance or material. Even our thermal imagers help to inspect the building for faults or leakages and energy auditing.

Read MoreQuik Enquiry

category-image

Top mounted level switches work on permanent magnet reed switch basis. The floats which contain permanent magnets move freely between their stops rising or falling with liquid level movement. Hermetically sealed within the tube are reed switches, completely isolated from the medium. The magnet’s field actuates the reed switch as the float moves while the stoppers restrict overrun and prevent the reed switch returning to its original position. Stopper positions should not be changed.

Read MoreQuik Enquiry

category-image

Analysis of air velocity are very relevant in air conditioning and ventilation systems, it can also directly affect indoor air quality. It is also monitored in laboratories and industrial processes.

Read MoreQuik Enquiry

category-image

Air, compressed air and gases are used in all industries. Humidity and moisture are generally not good for the product as they can deteriorate and reduce the quality of the product.

Read MoreQuik Enquiry

category-image

Capacitance Type switches are based on principle of measurement of capacitance. They can be widely used to sense the level of liquids even at higher temperatures up to 140°C. They are available in different stem lengths from 50mm to 350mm in step of 50mm(LSC-02) and are suitable for top as well as side mounting. They are operated on 24V dc/ 12V dc, which is often available in industries

Read MoreQuik Enquiry

category-image

Simple construction, reliable performance. The product can output stable and reliable switch control signal of making “breaking” without any fault action. So its reliability very high and anti-interference is strong. Sturdy and durable, need not maintain during its operation period. Easy installation method. Convenient adjustment method. Wide application scope.

Read MoreQuik Enquiry

category-image

Conductivity Type level switches are used in processing plants for conductive liquids of conductivity not less than 25 micro Siemens i n Food, Power, Chemicals, Sugar, D e t e r g e n t s , S t e e l , M i n e r a l s , Textiles, WTP and ETP etc.

Read MoreQuik Enquiry

category-image